RPM measurement tech note and example strategy - old forum post


#1

Mr. Bill

Joined on 09-23-2003
Posts 18
RPM Measurement Tech Note and Example Strategy

We have a new example PAC Control strategy called RPM Measurement. It is available on our Web site here:

Samples & Freeware

You can also get there by going to www.opto22.com, then choosing the Support tab, then the Downloads link (near the upper-left corner of the page), and then “Samples & Freeware” in the lower-middle section of the page.

It has a tech note discussing all the in’s and out’s of RPM and frequency measurement, as well as an example of one method.

This example requires PAC Control Pro, version R8.1d or newer.

Starting with the PAC Project release 8.2003, this example is part of the PAC Project install.


#2

Hi Ben,

Is there an example for PAC Control Basic? I’m using version 9.4

Regards.


#3

Hi Jude,

Re: [U][B]this example[/B][/U], I’m attaching a 9.4 version of the chart you can import into a 9.4 Basic or better strategy. I hope that gets you going!

-OptoMary

RMPchartBasic9.4.zip (2.42 KB)