Configure Epic Serial Module GRV-CSERI-4


#1

Hi all. I’m trying to use the Modbus Integration library with an Epic controller and GRV-CSERI-4 serial module (in slot 0). I’m having trouble figuring out how to configure the module, specifically setting the baud rate. The device I’m communicating with uses RS485 at 57600 baud. I figure the comm handle is tcp (tcp:127.0.0.1:22500), as with other PAC serial modules and I can set the RS485 mode (4-wire) in groovManage but for the life of me I cannot find how to set the serial comm parameters. I thought I found it with PAC Manager but it won’t let me access the EPIC since it uses groovManage. Help please!

Thanks.


#2

Page 285 of the PAC Control Users guide has the answers you seek.
To save you the time, here is the bit you need.


#3

Thanks, that worked great! I think I just glazed over that section because I thought it was relevant only to onboard serial ports. I appreciate your help.