Epic PR2 reboot

I just got a new PR2 powered up the other day and have noticed a few odd happenings. This morning it failed to boot up so I powered it down and restarted and it booted ok. A few minutes ago it seems to have crashed while I was in debug mode from PAC Control. The log has some error codes but I don’t know what they mean so I’ve listed the log below. Any ideas? Also when I go into Groov Manage to controller configuration it hangs and I get a server offline message for a few seconds.

[2021-10-09 20:32:18] ================== START ===================
Set HOME to /home/pac22/
Opto 22 Control Engine
Copyright (c) 2001-2021 Opto 22
Version: R10.4f
Build Date: 08/12/2021
Build Time: 18:42:05
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (https://www.openssl.org/)
[Creating User Threads]:

[2021-10-09 20:33:28] [Running]: Press to quit
[2021-10-09 20:33:47] [H0]+1:Total=1
[2021-10-09 20:33:52] Task 0 Acquired active dictionary, (timeout=45.000000 seconds)
[2021-10-09 20:33:52] Task 0 Released active dictionary
[2021-10-09 20:33:53] Task 0 Acquired active dictionary, (timeout=45.000000 seconds)
[2021-10-09 20:33:53] Task 0 Released active dictionary
[2021-10-09 20:33:53] [H0]+1:Total=2
[2021-10-09 20:33:56] [H0]-1:Total=1
[2021-10-09 20:33:56] [H0]-1:Total=0
[2021-10-09 20:34:51] [H0]+1:Total=1
[2021-10-09 20:34:51] [H0]+1:Total=2
[2021-10-09 20:35:20] [H0]+1:Total=3
[2021-10-09 20:36:24] [H0]+1:Total=4
[2021-10-09 21:24:37] Error: Signal 11
/usr/bin/SoftPAC(_Z12FaultHandleri+0x18)[0x55de8]
/lib/libc.so.6(__default_sa_restorer+0x0)[0x76a11ab0]
/lib/libc.so.6(__clock_gettime+0x28)[0x76ac1a00]
/usr/bin/SoftPAC(_Z12FaultHandleri+0x18)[0x55de8]
/lib/libc.so.6(__default_sa_restorer+0x0)[0x76a11ab0]
/lib/libc.so.6(__clock_gettime+0x28)[0x76ac1a00]
[2021-10-09 21:24:37] Error: Signal 11
[2021-10-09 21:24:43] ================== START ===================
Set HOME to /home/pac22/
Opto 22 Control Engine
Copyright (c) 2001-2021 Opto 22
Version: R10.4f
Build Date: 08/12/2021
Build Time: 18:42:05
This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit (https://www.openssl.org/)
[Creating User Threads]:

[2021-10-09 21:26:49] [Running]: Press to quit
[2021-10-09 21:26:50] [H0]+1:Total=1
[2021-10-09 21:27:12] [H0]+1:Total=2
[2021-10-10 00:00:05] [H0]-1:Total=1
[2021-10-10 00:33:59] [H0]+1:Total=2
[2021-10-10 00:34:04] Task 0 Acquired active dictionary, (timeout=45.000000 seconds)
[2021-10-10 00:34:05] Task 0 Released active dictionary
[2021-10-10 00:34:05] Task 0 Acquired active dictionary, (timeout=45.000000 seconds)
[2021-10-10 00:34:05] Task 0 Released active dictionary
[2021-10-10 00:34:06] [H0]+1:Total=3
[2021-10-10 00:35:13] [H0]+1:Total=4
[2021-10-10 00:35:37] [H0]+1:Total=5
[2021-10-10 00:35:37] [H0]+1:Total=6

Here is the version info. I haven’t checked for a new version yet.
System Version 3.2.2-b.168

For this sort of thing, please reach out to our support team. Opto22 - Support

They have the log viewing skills and tools to quickly dig into this and help you over the bump.